Technical Data Sheet
PP Homopolymer Resin S1005
Commodity: PP Homopolymer Injection Molding Grade Resin
1. Main standard
Chemical composition | Polypropylene (PP) |
Appearance | Virgin Natural Granules |
Specification Grade | Injection Molding Grade Resin |
Package | 1000kg in the jumbo bag |
Application | It mainly used in the woven bag,carpet backing, ropes, brush, net etc. |
2. Specification
General Properties | Typical Value | Unit |
Melt Flow Rate (230℃,2.16kg) | 4.8 | g/10min |
Density 23℃ | 0.905 | g/cm3 |
Tensile Strength@Yield 23℃ | 360 | kg/cm2 |
Elongation@Break 23℃ | >200 | % |
Impact Strength 23℃ | 2.8 | kg/cm2 |
Distortion Temperature | 110 | ℃ |
Hardness 23℃ | 100 | R |
Flexural Modulus 23℃ | 14000 | kg/cm2 |
